PREDITEC - IRM, Your partner in reliabilityColector de vibración PRE5050M
- Descripción
- Características
Descripción
El colector analizador portátil PRE5050M en combinación con el software predictivo PRE5050SW permite el seguimiento del nivel de vibración y del estado de los rodamientos, del nivel de temperatura, de la frecuencia de giro, análisis espectral y análisis de onda.
Se trata de un instrumento de fácil manejo para la toma de medidas de vibración y supervisión del estado general de la maquinaria rotativa.
El equipo incluye un sensor de vibración estándar, un sensor de temperatura por infrarrojos y luz estroboscópica led para medir velocidad de giro de ejes.
Este sistema de colector más software predictivo sirve de base tecnológica al paquete de implantación de mantenimiento predictivo PrediPack Starter.
Preditec le ayuda mediante un formulario a seleccionar su equipo, pinche aquí para acceder al cuestionario.
Características
Input: 1x ICP® powered accelerometer
Input range: 60 g PEAK with standard 100mV/g sensor (e.g.600g PEAK for 10mV/g sensor, the sensitivity is editable in the unit)
Measurements:
- Velocity RMS 10 - 1 000 Hz [mm/s, ips]
- Velocity Peak 10 - 1 000 Hz [mm/s, ips]
- Acceleration RMS 500 - 16 000 Hz [g]
- Acceleration Peak 500 - 16 000 Hz [g]
- Velocity time 1 - 1 000 Hz [mm/s, ips] 2048 samples *
- Velocity spectrum 1 - 1 000 Hz [mm/s, ips] 800 lines
- Acceleration time 1 - 16 000 Hz [g] 2048 samples *
- Acceleration spectrum 1 - 16 000 Hz [g] 800 lines *
- Acceleration Demod-Envelope RMS 500 - 16 000 Hz [g]
- Acceleration Demod-Envelope Peak 500 - 16 000 Hz [g] *
- Acceleration Demod-Envelope time 500 - 16 000 Hz [g] 2048 samples
- Acceleration Demod-Envelope spectrum 500 - 16 000 Hz [g] 800 lines, range 400 Hz *
- Displacement RMS 2 - 100 Hz [μm, mil]
- Displacement 0 - Peak 2 - 100 Hz [μm, mil]
- Displacement Peak - Peak 2 - 100 Hz [μm, mil]
- Temperature non-contact measurement 0 - 380°C (32 - 716°F)
Further functions:
- LED stroboscope (0,17 - 300 Hz, 10 - 18 000 RPM)
- LED torch, non-contact temperature measurement vibration stethoscope
Memory: 4 MB for data, 900 measurements of 800 lines spectra or 2048 samples time signals may be stored
Data storing (option): Off-Route Route with DDS 2014 software for Vibrio M (free download)
Interface: USB 2.0 compatible
Software: DDS 2014 software for Vibrio M (free download)
Display: colour graphic OLED display 128 x 128 pixels, diagonal 1,5“ (38mm)
Output: 1x AC signal 8 Ω / 0,5 W for external headphones (signal listening)
Power: 2x AA 1.5V batteries (alkaline, NiMH, Lithium - 8 hours operation)
Temp: Operating: -5°C to 55°C Dimensions: 150 x 60 x 35 mm
Weight: 330 g including batteries (without cable, sensor and magnet) 540 g including batteries, cable, sensor and magnet
Accessories: vibration sensor, coiled cable to connect vibration sensor, magnetic base for vibration sensor, headphones with 3.5 mm jack, USB cable, measuring tip for manual pressure on the sensor, transport case, CD with the manual
